2	DIR3D - 3D Directory\n\nDIR3D\nDIR3D Files (*.d3d)\n.D3D\nDIR3D.Document\nDIR3D Document
5	Unregistered Copy
6	You must enter a name string with at least five characters.
7	You have either misstyped your name or registration code.  Make sure that both exactly match the information you received from Regnoc Software.
8	Windows has reported an error in recording your registration information.  Ask your system administrator if your computer's registration database is currently protected.  If so, the administrator will need to remove protection to allow registration to be completed.
9	Thank you for registering your copy.  Save your registration information in case you need to reinstall DIR3D.  Note that you can continue to download the latest version of DIR3D.  Your registration will continue to apply.
10	Days before demo expires: 
11	Expired Copy of DIR3D
12	(Most features are disabled.)
13	Fully Registered Copy
14	DIR3D - 3D File Manager - Regnoc Softare
15	The hidden/system file you have selected will not be displayed unless you change your selection on the File/Display Detail menu item.
16	Warning Message
17	DIR3D was not able to make any network connections.  Make sure that your network interface card  is connected.
18	Select one of the network drives and then click "OK", or select "Cancel" to exit without connecting to a network drive.
19	DIR3D was not able to make this network connection, either because the link is already in use, disabled, or access is denied.
20	Select a free drive letter to assign to this network connection.
21	The network would not allow this connection to be made - access denied.
22	This connection is already assigned - no reason to establish a second link.
23	The drive letter you have selected is invalid (bad device type.)  Select a name like F:
24	The network does not recognize this connection string, possibly because this device just became inactive (bad device.)
25	The network does not recognize this connection string, possibly because this device just became inactive (bad net name.)
26	An error was detected in reading your local profile file (bad profile.)
27	An error was detected in attempting to read your local profile file.
28	DIR3D was not able to open the registration database, possibly because your system has been set up to only allow the system administrator access.
29	Pick a file type in the selection box at top-left, and then select the Remove Type button.
30	Remove File Type
31	Are you sure that you want to remove the following file type from the registration list?  -> 
32	Your new key could not be added to the registration database.  Make sure that your key contains only valid file characters.
33	Select one of the programs in the list.  This program will be associated with the file type you have selected at the top.
34	Select a file type to associate with this program.  The program will be associated with the type selected in the top-left list.
35	DIR3D was not able to access the Windows Registration Database for this file type, perhaps because the database is locked by your system administrator.
36	The shorthand name should consist of letters and numbers, without spaces.  You can use the period and underline characters.
37	Are you sure that you want to remove this program from the list of those registered?  The program files will not be deleted, but you will not be able to associate this program with specific file types.
38	Number of color bits per pixel: 
39	Number of color planes:  
40	Number of device-specific brushes:  
41	Number of device-specific pens:  
42	Number of device-specific fonts:  
43	Number of entries in the device's color table (if used):  
44	The color resolution of in bits per pixel:  
45	Raster
46	Requires banding support:
47	Supports fonts larger than 64K:
48	Capable of transferring bitmaps:
49	Supports bitmaps greater than 64K:
50	Supports device bitmaps:
51	Supports SetDIBits() and GetDIBits() functions:
52	Supports SetDIBitsToDevice() function:
53	Capable of flood fills:
54	Capable of Windows 2.0 features:
55	Includes state block in the device context:
56	Supports dev opaque and DX array:
57	This is a palette-based device:
58	Can store bitmaps locally:
59	Capable of scaling image:
60	Can do StretchBlt() function:
61	Can do StretchDIBits() function:
62	Curves
63	Supports drawing curves:
64	Supports drawing circles:
65	Supports drawing pie wedges:
66	Supports drawing chords:
67	Supports drawing ellipses:
68	Supports drawing wide borders:
69	Supports drawing wide, styled borders:
70	Supports drawing interiors:
71	Supports drawing rounded rectangles:
72	Lines
73	Supports drawing polylines:
74	Supports markers:
75	Supports polymarkers:
76	Supports drawing wide lines:
77	Supports drawing styled lines:
78	Supports drawing wide styled lines:
79	Supports drawing interiors:
80	Polygons
81	Supports drawing alternate fill polygons:
82	Supports drawing rectangles:
83	Supports drawing winding number fill polygons:
84	Supports drawing scan lines:
85	Text
86	Supports character output precision:
87	Supports stroke output precision:
88	Supports stroke clipping precision:
89	Supports 90 degree character rotation:
90	Supports character rotation by any amount:
91	Supports indepent X,Y scaling:
92	Supports doubling character size:
93	Supports integer multiples of character size:
94	Supports scaling by any amount:
95	Supports creation of italics:
96	Supports creation of underlined characters:
97	Supports creation of strike-out characters:
98	Supports enumeration of raster fonts:
99	Supports enumeration of vector fonts:
100	OLE initialization failed.  Make sure that the OLE libraries are the correct version.
101	<<Unknown Format>>
102	Failed to create object.  Make sure the object is entered in the system registry.
103	The Open GL 3D library could not be loaded.  This probably means that you are running an old version of Windows.  Try rebooting your computer before doing anything more serious.  You may need to install a new version of Windows.
104	Critical Error
105	%lu KB
106	%lu KB Free on %c:
107	Unavailable
108	..(To Parent Directory)
109	(No association for this type.)
110	You will need to make an assoication between a program and this file type to lauch the program.  Use the File/Associations menu item.
111	Message
112	Error Message
113	Are you sure that you want to delete the selected directory, and all files and subdirectories?  This operation cannot be undone.
114	Are you sure that want to delete the currently selected files?  This operation cannot be undone.
115	Confirmation Required
116	Your are about to delete a 
117	SYSTEM 
118	HIDDEN 
119	 file.  Please confirm you wish to delete this file: 
120	and 
121	DIR3D was not able to delete all of the selected files, either because they are read-only or in use by another program.  Use Ctrl-Right Mouse button to check or change the read-only status of any file or directory.
122	Unable to Delete File
123	 directory.  Please confirm you wish to delete this directory: 
124	DIR3D was not able to delete this directory and all of its contents.  Check that the directory chain does not contain currently running applications or network resources.
125	DIR3D could not create this directory, either because the name contains invalid charactors, or because the directory already exists.
126	DIR3D cannot rename this file.  The file may be in use, or another file by the same name may exist in this directory, or the new name contains characters not supported by the operating system for file names.
127	DIR3D could not change the file attirbutes to those specified, possibly because the opperating system does not allow this change.  All values have been reset.
128	Polygons
129	DIR3D could not rename the directory, possibly because this directory name already exists at this level in the directory chain.
130	Supports double weight characters:
131	Supports wide styled borders:
132	Copy Confirmation (turn off in Options menu)
133	Are you sure that you want to copy the selected files to: 
134	Move Confirmation (turn off in Options menu)
135	Are you sure that you want to move the selected files to: 
136	You need to select a file from the list before any action can take place.
137	DIR3D was not able to delete this entry from your DIR3D.INI file, possibly because that file has been damaged.
138	Thank You!
139	DIR3D was not able to start a second copy of itself.
140	The destination disk does not have room to hold all of the selected data (DOS Disk Full Error.)
141	The operating system would not allow this file name to be used.
142	The destination disk or drive is read-only, so file copy and move operations are not possible.
143	Do you want to stop this copy operation?
144	Do you want to stop this move operation?
146	Are you sure that you want to copy the selected file(s) to the directory under the drop point?
32771	Move towards the left
32780	Return to home position (root.)\nHome
32781	Move towards the right.
32782	Move upwards
32783	Move downward.
32784	Move further into the scene.\nIn
32785	Move out of the scene (backwards.)\nOut
32786	Opens help file on the table of contents page.\nHelp
32789	Reload all of the file details for this disk/network connection.
32790	Rotate view around vertical axis to the left.\nRotate Left
32791	Rotate view around vertical axis to the right.\nRotate Right
32798	Change the colors used to draw the scene.
32799	Change the directory size and space parameters.
32800	Change the scene's lighting
32801	Set the directory floor design.
32802	Sets which file types are visible and which operations require confirmation.
32803	Move back to the last position occupied.\nBack
32804	Change movement amounts
32806	Select which files are displayed in directory details.\nFilter
32807	Delete the currently selected file or directory.\nDelete
32808	Copy the currently selected files.\nCopy
32809	Move the currently selected files to a new drive or directory.\nMove
32810	Change the name of the currently selected file or directory.\nRename
32811	Set file display options and sound effects.
32812	Toggles the sound effects on and off.
32813	Toggles the vertical scroll bar between moving along Y or Z axis.\nV Scroll Y<>Z
32830	Change the drive or network connection viewed.\nDrive
32831	Connect to a network drive.\nConnect
32832	Disconnect from a network drive.\nDisconnect
32833	Clear file details and show only directory boxes.\nPlain
32840	View the list of currently selected files and directories.\nView Selected
32841	Change the order in which files are displayed.
32843	Move to the top of the directory.\nTop
32844	Move to the bottom of the directory.\nBottom
32846	Information on how to order this product.
32847	Create a new directory under the last selected directory.
32848	Locate a file on a drive or network connection.\nFind Files
32849	Find a file on this disk drive.
32850	Toggles joystick control of position on and off.
32851	Calibrates the movement and sensitivity of the joystick.
32852	Enter the registration code you obtained from Regnoc Software.
32854	Notice of limited liability.
32855	Associate a program with a file type (extension.)
32856	Information about navigation in DIR3D
32857	Introductory information about DIR3D.
32860	Select which font to use for directory and file names.
32861	Set options that control display speed and detail.
32862	Start a program running, or modify launch list.
32863	Turn background music option on and off and select .MID song.
32865	Open a second DIR3D window to look at another disk/drive.
57344	DIR3D
57345	Ready
57600	Create a new document\nNew
57601	Open an existing document\nOpen
57602	Close the active document\nClose
57603	Save the active document\nSave
57604	Save the active document with a new name\nSave As
57610	Update the container to show any changes\nUpdate
57611	Save a copy of the active document with a new name\nSave Copy
57616	Open this document
57617	Open this document
57618	Open this document
57619	Open this document
57632	Erase the selection\nErase
57633	Erase everything\nErase All
57634	Copy the selection and put it on the Clipboard\nCopy
57635	Cut the selection and put it on the Clipboard\nCut
57636	Find the specified text\nFind
57637	Insert Clipboard contents\nPaste
57638	Insert Clipboard contents and a link to its source\nPaste Link
57639	Insert Clipboard contents with options\nPaste Special
57640	Repeat the last action\nRepeat
57641	Replace specific text with different text\nReplace
57642	Select the entire document\nSelect All
57643	Undo the last action\nUndo
57644	Redo the previously undone action\nRedo
57653	Split the active window into panes\nSplit
57664	Display program information, version number and copyright\nAbout
57665	Quit the application; prompts to save documents\nExit
57680	Switch to the next window pane\nNext Pane
57681	Switch back to the previous window pane\nPrevious Pane
57856	Insert new embedded object\nNew Object
57857	Edit linked objects\nEdit Links
57858	Convert object to different type\nConvert Object
57872	Activate embedded or linked object
57873	Activate embedded or linked object
57874	Activate embedded or linked object
57875	Activate embedded or linked object
59136	EXT
59137	CAP
59138	NUM
59139	SCRL
59140	OVR
59141	REC
59392	Show or hide the toolbar\nToggle ToolBar
59393	Show or hide the status bar\nToggle StatusBar
61184	Change the window size
61185	Change the window position
61186	Reduce the window to an icon
61187	Enlarge the window to full size
61188	Switch to the next document window
61189	Switch to the previous document window
61190	Close the active window and prompts to save the documents
61202	Restore the window to normal size
61203	Activate Task List